Easy Peanut Brittle Recipe (2024)

FAQs

Why put baking soda in peanut brittle? ›

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

If your peanut brittle never sets up hard, it means you didn't cook it to a high enough temperature. Make sure you cook it to the “hard crack” stage, between 298°F- 313°F, and swirl your thermometer probe around in the syrup to get an accurate read of the temperature.

Water: Water helps the sugar completely dissolve. Salt: A pinch of salt enhances the other flavors. If you opt for salted butter, you can skip this ingredient. Peanuts: Of course, you'll need peanuts for this classic treat!

#1 - Store in an airtight container

It should come as no surprise that storing your peanut brittle in airtight containers is one of the best ways to store peanut brittle. Keeping air out helps maintain your brittle's freshness by minimizing the amount of moisture that might come into contact with your sweet treat.

Why Is My Peanut Brittle Chewy / Sticky / Didn't Harden? This is a temperature issue. Make sure the candy thermometer reaches exactly 300ºF / 149ºC, which is hard crack stage, before pouring onto baking sheet.

When the candy mixture is not mixed to the right temperature, or you forget to add the baking soda, then you might end up with something more chewy than brittle. Or worse, you just burn everything and have to start all over.

You'll also want to prepare a baking sheet, with either a silicone mat or parchment paper. The mat/paper will help ensure the peanut brittle doesn't stick directly to pan once it has cooled.

To store: Store peanut brittle (once it's completely cooled) in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To freeze: Peanut brittle can be frozen and stored up to 3 months.

Too pale and the candy will not set, too dark and the sugar will have burnt. If you feel the outside edge of the boiling sugar is turning too dark too quickly then you can swirl the pan gently once or twice to even out the boiling sugar mixture but do protect your hands from splashes and again, do not stir.

Pralines have a lot in common with nut brittle, with the difference being mostly in the addition of cream and the cooking temperature––the sugary syrup used to coat pralines is heated to a soft-ball consistency, a lower temperature than the hard-crack stage of peanut brittle.

Does weather affect making peanut brittle? ›

I've learned that brittle is better when made on a cool, dry day. When I've made the candy on a warmer, humid day, it tends to be a stickier brittle. This is because the brittle takes longer to cool, and it reaches a point where it is no longer evaporating moisture into the air.

Brittles are typically composed mostly of sugar, while toffees contain a fair amount of butter and in some cases milk. This makes toffees fuller and richer in taste, while brittles are more purely sweet and sugary. Brittles are also much thinner than most toffees.

Brittle is best made on dry, low humidity day. If you make it when it is humid, the candy will attract moisture from the air, making it sticky instead of crisp. Humidity also slows the cooling process while your candy is setting, increasing the chances of having unwanted crystals form.

The secret is in the baking soda. As the sugar is cooking and begins turning amber in color it accumulates small amounts of acid, and that acid reacts chemically with the alkaline baking soda releasing about a zillion minuscule bubbles of CO₂ that get trapped, making the sugar porous and, well… brittle.

Brittles are cooked to a very high temperature, the 'hard crack' stage (296 degrees F, 147 degrees C). You will need to stir the sugar mixture occasionally to prevent the peanuts from sticking to the bottom of the pan, and thereby scorching.

When the baking soda combines with the boiled sugar, it creates Carbon Dioxide that form lots of bubbles and puff the candy up. Once it hardens, the bubbles get trapped inside and create a texture that looks just like a sponge or piece of foam. It's crunchy and sweet, with an almost molasses-like flavor.

When baking soda is added, it reacts with the acid and releases bubbles of carbon dioxide. This makes the syrup foam and expand so the finished candy is not so hard and dense.

Examples of interfering agents include corn syrup and cream of tartar. A key step in making brittle is heating the syrup to the proper temperature. Typically, this is the hard crack stage or 300° to 310°F. This caramelizes the sugar to an amber color.

In summary, the purpose of adding baking soda to dough is to generate carbon dioxide gas, which causes the dough to rise and become light and fluffy. This is important because it makes the dough easier to work with and results in a better texture and flavor in the final baked product.